Description

Intelligent Power Inverter

(This model has been used by the customer for a long time, its performance has been appliance. AC output switches automatically between wire and inverter. It adopts a switch power supply with high efficiency.

Under the same load, the battery working time can be ½ to 1/3 longer than a conventional inverter battery, a certain safe load shall be reserved for induction load (because the actuation current of induction load is 5-10 times of running current). This equipment can be used in light, radio, fan, audio, computer, fax TV, hairdryer, and other home appliances.

1. Function Introduction
2. 12V battery input terminal cable (red wire to the positive pole, black wire to negative pole)
3. Wire input plug
4. AC output plug (AC220V)
5. Battery voltage indicator meter
6. AC output voltage indicator meter
7. Work indicator light
8. Charger working indicator

(orange light when charging, green light when full)

1. Inverter working indicator
2. Inverter protected indicator
3. Battery working indicator
4. Wire output indicator
5. Inverter switch

1. Properties
2. Maximum continuous load: 800w (transient maximum: 1200w)
3. Inverter output: AC 220V
4. Charger power input: AC 160V-AC260V
5. Charging current: 0-12A (automatic variable with battery capacity, the current will dropped to 0 automatically when it is fully charged).
6. Inverter output voltage: variable (110v-300v) (yellow fine tuner button on built-in main board)

3. Useful Direction
4. Connect battery first, the red cable is the positive pole, black cable is the negative pole. Prevent mistaken connection of battery poles. Be sure not to invert the positive and negative poles of the battery.
5. Battery voltage shall be higher than 12V and lower than 16V before starting.
6. When the load is bigger than 800w, stop the equipment after running 3 seconds.
7. When the load is bigger than 800w, the battery capacity shall be greater than 30A.
8. When the battery voltage is lower than 11v, the equipment begins to alarm; when battery voltage is lower than 9.8v, it stops and then connects charger power to charge the battery.
9. AC of inverter output, prohibit connecting inverter output to city power, otherwise, it will lead to electric shock and equipment burning.
10. In case of a short or long-term shutdown, no need to remove the battery, just turn off the inverter switch, which facilities next use, and avoid wrong connection of positive and negative poles.
11. When loaded with induction load, its start current must be 5-7 times of actual current. This large power load shall fall within the allowable power range, in case excessive start current breaks the main unit instantaneously. (This equipment can’t load the air-conditioner and fridge, do not try).